manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 205 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 205

Scalar DLC Reference Guide

187

Field/Button

Icon

Operation

Description

LUN ID

Supplied

LUN ID (internal).

Name

Enter

LUN name. Contains ‘LUN’ + LUN Number.

LUN Number

Enter

The LUN SCSI ID (external, seen by SCSI initiator).

Vendor ID

Select

Vendor ID, as will be seen by the SCSI Initiator.

Product ID

Select

Product ID. The format of the data transferred from/to 
the SCSI initiator:

Firmware Revision

Enter

The firmware revision level, short form.

Full Firmware 
Revision

Enter

The firmware revision level, complete.

Create

Click

Create SCSI LUN

Cancel

Click

Cancel creation.

Help

Click

Open online help for the current pane.

CAUTION

The LUN creation is not possible if the target already contains the maximum 
number of LUNs.

Note

The newly created LUN will 

not

 be active until there is a SCSI client assigned to this LUN.

Moreover, the LUN requires the target to be active, and the target becomes 

active

 only 

when the SCSI client is assigned to the LUN 0.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments