manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 117 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 117

Scalar DLC Reference Guide

99

Resource

Figure 70

Logical Library Resources

The resource charts show the total coverage of the logical library. For example, if the physical library 
contains 1000 storage slots, and the configured logical library covers 800 slots, the Storage chart shows 
80%. Same for the Mailbox (I/E), Drives, and Cartridges.

Field/Button

Icon

Operation

Description

Storage

Supplied

Storage slots usage, % and chart.

I/E slots

Supplied

Insert/eject slots usage, % and chart.

Drives

Supplied

Drives usage, % and chart.

Cartridges

Supplied

Cartridges usage, % and chart.

Refresh

Click

Refresh Logical Library resources.

Help

Click

Open online help for the current pane.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments