manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 182 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 182

164

Configuration Tab

SCSI Client

There are five sets of properties associated with the SCSI Client.

•

Properties. Main client properties. Refer to 

Properties

 on page 164.

•

Mode. SCSI mode parameters. Refer to 

Mode

 on page 166.

•

Drives. The library drives as they are seen from the client side. Refer to 

Drives

 on page 168.

•

I/E slots. The library I/E slots as they are seen from the client side. Refer to 

I/E Slots

 on page 169.

•

Storages. The library storages as they are seen from the client side. Refer to 

Storages

 on page 170.

Properties

Figure 121

SCSI Client Properties

The SCSI Client Properties pane indicates the main client properties.

Note

Only administrator users can modify or remove clients. For the user without 
administrative privileges, the operation buttons are disabled.

Field/Button

Icon

Operation

Description

Name

Enter

The client name.
Also refer to 

Table 6

 on page 16.

Library

Select

The client operates with the selected logical library.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments