manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 173 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 173

Scalar DLC Reference Guide

155

Drives

The Drives pane shows the list of all drives in the library, defines what drives are defined to the current client, 
shows the drives reserved by the client, and allows the status to be changed.

Figure 114

DAS Client Drives

Field/Button

Icon

Operation

Description

Reserving

Supplied

The drive reserving list.

Select

Drive

The drive name.

Select

Media Type

The drive type. Refer to 

Drive Types

 on page 

266.

Select

Client

The drive owner, if any.

Defining

Supplied

The drive defining list.

Select

Drive

The drive name.

Select

Media Type

The drive type. The drive type. Refer to 

Drive 

Types

 on page 266.

Select

Client

The drive owner.

Unreserve All

Click

Unreserve all slots currently reserved for the client (storage,

 

I/E, and drives).

Up

Click

Reserve the selected drive for the client, the drive should be 
empty. Has the same effect as the DAS command “

allocd 

drive UP

”. Refer to 

DAS Administration Guide

.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments