Quantum Scalar Distributed Library Controller 2.7 Page 88 Reference Manual Download

Page: 88 / 324

Management GUI

Diagnostic (Service)

Dark yellow

Either the library diagnostic or the firmware update is
being executed.

Disabled

Dark yellow

The library is logically switched off (

Home

operation

executed).

Invalid

Red

The library configuration is invalid (one or more
required partition(s) missing).

Not ready

Red

The library is not available (either the connection is
lost or the admin has manually changed the library
state).

a. Alarm flag indicates that an error has occurred but it does not specify the error. To find out what has happened, use the

Log Viewer, as described in

Log Viewer Utility

on page 237.

Table 11

Physical Library States

State

Icon

Color

Description

Online

Green

The library is online and accepts all commands

Online, alarm

a. Alarm flag indicates that an error has occurred but it does not specify the error. To find out what has happened, use the

Log Viewer, as described in

Log Viewer Utility

on page 237.

Green

The library is online and accepts all commands.
An error has been encountered.

Diagnostic

Dark yellow

The library diagnostic is being executed.

Service

Dark yellow

The library is in service mode (firmware update
process is being executed).

Not ready

Red

The library is not ready (service needed).

Offline

Red

The library is offline (connection lost).

Table 12

Robot States

State

Icon

Color

Description

Normal (Online)

Black

The robot is online and functioning. All elements and
slots of the robot are accessible.

Offline

Gray

The robot is offline. All elements and slots of the robot
are temporary not accessible.

Table 10

Logical Library States

State

Icon

Color

Description

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Search results

Summary of Contents for Scalar Distributed Library Controller 2.7

Reviews:

Related manuals for Scalar Distributed Library Controller 2.7

Brands by name

Popular brands

Quantum Scalar Distributed Library Controller 2.7, Reference Manual

Search results

Summary of Contents for Scalar Distributed Library Controller 2.7

Reviews:

Related manuals for Scalar Distributed Library Controller 2.7

Brands by name

Popular brands