manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 101 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 101

Scalar DLC Reference Guide

83

By default, the cartridges are sorted by media type, in ascending order. Click on the appropriate column title 
to change the sorting order.

To select cartridge for the operation, click on it. 

<Ctrl>

+Click allows multiple cartridge selection, for the 

multiple 

Export/Import

 operations. Multiple 

Mount/Dismount/Move

 operations are not allowed in the 

Scalar DLC Management GUI.

Figure 61

Multiple Mailbox Selection

After a cartridge has been moved to the mailbox slot through the 

Export

 command and become 

ejected

, it 

cannot be manipulated again until 

Inventory

 has been completed. After an 

inventory

 is completed, the 

cartridges are recognized as 

stored

.

Field/Button

Icon

Operation

Description

Volser

Select

The volume serial number, a cartridge name. Each cartridge 
has one volser.
The optical disks are represented with two cartridges because 
each optical disk has two volsers.

Media Type

Select

Cartridge media type. Refer to 

Media Types

 on page 263.

State

Select

A cartridge state, empty means 

stored

. Refer to 

Cartridge 

State

 on page 84.

Import

Click

Transfer the cartridge from a mailbox slot to a storage area. 
The target slot is a cartridge home position.
The button is enabled for a cartridge stored in a mailbox.

Export

Click

Transfer the cartridge to a mailbox. If more than one mailbox 
exists, an additional export selection appears. See 

Figure 61

. 

Select an appropriate mailbox from the combo box.
This operation saves the cartridge home position.
The button is enabled for a cartridge not in a mailbox, when a 
mailbox exist.

Mount

Click

Insert a cartridge into the first available tape drive of the 
appropriate media type (

Generic Mount

).

The button is enabled for a stored cartridge.

Dismount

Click

Move a cartridge from a tape drive to the cartridge home 
position.
This button is enabled for a mounted cartridge.

Move

Click

Open a pop-up Move window. Refer to 

Move Cartridge to 

Element

 on page 86.

The move operation transfers a cartridge from its current 
position to a selected destination slot.

Help

Click

Open online help for the current pane.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments