manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 217 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 217

Scalar DLC Reference Guide

199

Service Tab

The Service Tab is designed for the Customer Engineer (CE) and Admin users. The Service Tab has an 
additional level with the following tabs:

•

Logs Tab. Monitoring the library command log and error log. Refer to 

Logs Tab

 on page 199.

•

Diagnostic Tab. Executing the library diagnostics. Refer to 

Diagnostic Tab

 on page 203.

•

Tickets Tab. Managing the service requests (tickets). Refer to 

Tickets Tab

 on page 205.

•

Operator Panel Tab. Executing operator panel commands from a remote console. Refer to 

Operator Panel Tab

 on page 211.

•

Cluster Tab. Viewing and changing the cluster settings. Refer to 

Cluster Tab

 on page 214.

•

SNMP Tab. Managing the SNMP service settings. Refer to 

SNMP Tab

 on page 215.

Logs Tab

This pane allows the user to view the error log and the command history for the selected robot of the 
physical library. When a specific event is selected, the information that has been collected can be sent to a 
specified email address.

This section provides an additional level with the following tabs:

•

Command Log. The commands executed by the physical library. Refer to 

Command Log

 on page 

200.

•

Error Log. The errors occurred in the physical library. Refer to 

Error Log

 on page 202.

Note

The Command Log and Error Log features are not available for the Scalar 1000 library.

Note

The Scalar 10K DA library has two robots, so it contains two different Command logs 
and Error logs.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments