manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 199 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 199

Scalar DLC Reference Guide

181

Figure 131

Port: Fibre Channel

Field/Button

Icon

Operation

Description

Port ID

Supplied

The port ID.

Name

Supplied

The port unique name.

State

Supplied

The port state. See 

Table 22

 on page 178.

Number of 
targets

Supplied

The number of targets currently configured for the SCSI port.

Max number 
of targets

Supplied

The maximum number of targets that can be configured for the 
SCSI port. Refer to 

Table 23

 on page 179.

Max number 
of LUNs

Supplied

The maximum number of LUNs that can be configured for the 
targets of the SCSI port. Refer to 

Table 23

 on page 179.

World wide 
name

Supplied

(only for the Fibre Channel)
The world wide port name, hexadecimal.

Add new 
Target

Click

Pop-up target creation window appears. Refer to 

Create 

Target

 on page 185.

Help

Click

Open online help for the current pane.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments