manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 135 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 135

Scalar DLC Reference Guide

117

Statistics

Figure 85

Drive Statistics

Note

If the DAS interface is being used, the drives are to be named according to the DAS 
standards. It recommended that you use names no more than 9 alphanumeric 
characters long and beginning with a letter.

Field/Button

Icon

Operation

Description

Statistics rate

Select

Show daily/weekly statistics.

Start date

Select

Start date in range.

End date

Select

End date in range.

Statistics type

Select

Statistics type (All / Mounts only / Errors only / Cleanings only).

Mounts

Supplied

Mounts executed by the drive.

Errors

Supplied

Errors encountered in the drive.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments