manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 116 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 116

98

Configuration Tab

Number of slots

Supplied

Number of available storage slots.

Number of I/E slots

Supplied

Number of available mailbox slots.

State

Select

Logical library state. See 

Table 10

 on page 69.

Can be changed manually (from 

online

 to 

not ready

 

and vice versa) to make the library unavailable but this 
does not affect the tape device and/or other logical 
libraries.

Auto-cleaning

Supplied

Indicates if auto-cleaning is enabled or turned off.

Clients

Supplied

The clients authorized to use the logical library.

Inventory

Click

Initialize all the library elements and assign a home 
position to cartridges. Affects all libraries included the 
shared partitions.

Update

Click

Save the logical library properties after edit.

Remove

Click

Remove the logical library with all its contents. The 
shared partitions are not affected.

Assign new Partition

Click

Assign new partition to the logical library. A pop-up 
assignment window opens. Refer to 

Assign Partition

 

on page 122.
This button is disabled if the physical library contains 
no partitions that are not assigned to the current 
logical library.

Add new Scratch 
pool

Click

Add new scratch pool to the logical library. A pop-up 
creation window opens. Refer to 

Create Pool

 on page 

123.

Add new Clean pool

Click

Add new clean pool to the logical library. A pop-up 
creation window opens. Refer to 

Create Pool

 on page 

123.

Add new Mailbox

Click

Add new mailbox to the logical library. A pop-up 
creation window opens. Refer to 

Create Mailbox

 on 

page 125.

Reset Alarm flag

Click

Remove Alarm flag (active only when the library is in 

Alarm

 state).

Refresh Alarm flag

Click

Refresh Management GUI for Alarm.

Help

Click

Open online help for the current pane.

Field/Button

Icon

Operation

Description

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments