manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 110 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 110

92

Library Tab

By default, the drives are sorted by element type, in ascending order. Clicking on the appropriate column 
title will change the sorting order.

To select drive for the operation, click on it. 

<Ctrl>

+Click allows multiple drive selection, for the multiple 

Export

 operations. Multiple 

Dismount/Move

 operations are not allowed in the Scalar DLC Management 

GUI.

Field/Button

Icon

Operation

Description

Name

Select

The drive name. An icon also indicates the drive state. See 

Table 16

 on page 73.

Element Type

Select

A drive type. Refer to 

Drive Types

 on page 266.

Current volser

Select

If the drive is occupied, a contained cartridge is shown. For the 
optical disk two cartridges are shown, active side first.

Import

Click

Disabled for a drive.

Export

Click

Transfer the cartridge to a mailbox. If more than one mailbox 
exists, an additional export selection appears. See 

Figure 61

 

on page 83. The user selects the appropriate mailbox from the 
combo box. This operation saves the cartridge home position.
The button is enabled when a mailbox exists.

Mount

Click

Disabled for a drive.

Dismount

Click

Move a cartridge from a tape drive to the cartridge home 
position.
This button is enabled for a mounted cartridge.

Move

Click

Open a pop-up Move window. Refer to 

Move Cartridge to 

Element

 on page 86.

The move operation transfers a cartridge from its current 
position to a selected destination slot.

Clean Drive

Click

Initiates manual drive cleaning operation via the auto-cleaning 
media, not the Clean Pool media.

Help

Click

Open online Help for the current pane.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments