manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 181 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 181

Scalar DLC Reference Guide

163

SCSI

All the operations with the SCSI Clients are enabled only after the configuration of SCSI Target software. 
That can be done via the SCSI Target tab. Refer to 

SCSI Target Tab

 on page 178.

Figure 120

SCSI Pane

Button

Icon

Operation

Description

Add new 
Client

Click

Pop-up client creation window appears. Refer to 

Create SCSI 

Client

 on page 171.

Enable

Click

Enable SCSI Interface.

Disable

Click

Disable SCSI interface.
The following commands are serviced in the regular way then:

•

Inquiry

 for the 

Standard Inquiry Data

 page

• Request Sense

•

Report LUNs

 (SCSI-3 mode) 

All other commands and the 

Inquiry

 command for other pages 

are rejected with the CHECK CONDITION SCSI status, and

 

02/04/00 “Not ready due to unknown cause” SCSI sense data.

Help

Click

Open online help for the current pane.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments