manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 146 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 146

128

Configuration Tab

Command queue 
execution 

a

Supplied

Activated

 means commands should be executed when 

they arrive to the physical library.

Frozen

 means commands should be executed only 

after the library will be activated again.

Number of storage

Supplied

Number of available storage slots.

Number of I/E slots

Supplied

Number of available mailbox slots.

Number of drives

Supplied

Number of available drives.

Number of cartridges

Supplied

Number of available cartridges.

Remove

Click

Remove the physical library.

Add new Partition

Click

Add new partition. Refer to 

Create Partition

 on page 

143.

Freeze

Click

Freeze command queue execution.

Activate

Click

Activate command queue execution (after freeze).

Reset Alarm flag

Click

Remove Alarm flag (active only when the library is in 

Alarm

 state).

Refresh Alarm flag

Click

Refresh Management GUI for Alarm.

Help

Click

Open online help for the current pane.

a. The Freeze command queue execution feature currently is implemented for the Scalar 10K DA libraries only.

CAUTION

If the physical library properties are changed (for example, another drive 
added), the Scan SCSI Bus operation does not update the existing library 
properties. The update can be done only by the Teach command from the 
device operator panel.

CAUTION

When new drive(s) and/or insert/eject slot(s) have been added to the physical 
library that already contains a working configuration (logical library, clients, 
etc.), the admin must check whether the configuration of partitions is still 
correct. Refer to 

Partition

 on page 136.

The operation of assign-unassign partitions may be required. Refer to 

Assign 

Partition

 on page 122 and 

Assign Partitions

 on page 40.

CAUTION

If the physical library is removed, all partitions, media rules, and offline 
cartridges are lost. Library delete confirmation is required.

Field/Button

Icon

Operation

Description

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments