manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 132 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 132

114

Configuration Tab

Field/Button

Icon

Operation

Description

Name

Supplied

Slot name.

ID

Supplied

Slot identification number.

Physical coordinate

Supplied

Slot physical (SCSI) coordinate. Refer to 

Element 

Addressing

 on page 260.

Robot1 coordinate

Supplied

The slot coordinate in Robot1 (

None

 means the slot is 

assigned to another robot). Refer to 

Element 

Addressing

 on page 260

Robor2 coordinate

Supplied

The slot coordinate in Robot2 (

None

 means the slot is 

assigned to another robot). Refer to 

Element 

Addressing

 on page 260

LSCI coordinate

Supplied

Slot LCSI coordinate. Refer to 

Element Addressing

 on 

page 260.

Current cartridge

Supplied

A cartridge contained in the slot, if any.

State

Supplied

Slot state (empty/occupied)

Owner

Select

A slot owner (client). The reserved slot can be used 
only by its owner.

None

 means the slot is not reserved.

Exclusive reservation

Supplied

The reservation may be either normal (another owner 
can un-reserve the slot) or exclusive (only the owner 
can change the reservation).

Assigned/Unassigned 
Mailboxes

Select and 
click

Select mailbox and click arrow button to assign/
unassign the current slot to/from it.

Update

Click

Save the slot properties after edit.

Reset Alarm flag

Click

Remove Alarm flag (active only when the slot is in 

Alarm

 state).

Refresh Alarm flag

Click

Refresh Management GUI for Alarm.

Help

Click

Open online help for the current pane.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments