manualshive.com logo in svg

Quantum Scalar Distributed Library Controller 2.7, Reference Manual, Page: 250 / 324

Share
Download
Quantum Scalar Distributed Library Controller 2.7 Reference Manual Download Page 250

232

Tools and Utilities

Database Save

This feature creates the archive with the Scalar DLC database backup contents and saves the archive to 
the destination specified. The database backup however holds only sufficient information, without 
temporary data (notifications, moves executed, etc.). See 

Table 26

.

Figure 169

Database Save Dialog

Table 26

Database Archive

Data description

Saved

Physical libraries data, statistics, media rules, partitions, logical libraries

Yes

Logical library statistics, pools, mailboxes, drives, cartridges

Yes

Clients, client interface settings, reserve and define ranges, aliasing

Yes

Move commands history, list of notifications sent

No

Users and user settings, registration info; Notification rules, tickets, SNMP settings

Yes

List

Operation

Description

Database

Supplied

The original database name.

Destination

Enter

The archive file destination.

Save

Click

Save database to archive.

Exit

Click

Close the dialog.

Summary of Contents for Scalar Distributed Library Controller 2.7





































































































































































































































































































































Reviews:

No comments