![background image](http://html2.mh-extra.com/html/quantum/dxi3500/dxi3500_user-manual_3721417163.webp)
Chapter 5 Implementing a Data Replication Plan
Setting Up Data Replication
Quantum DXi3500 and DXi5500 User’s Guide
143
Setting Up the Target DXi
System
5
Before data can be replicated from a source system to a target system, the
target must be authorized to receive data from a specific source. To
authorize a target system to receive data from a source, you must add the
source hostname or IP address to the
Source Host List
on the target
system.
To add a source hostname or IP Address on a target system:
1
Access the remote management pages on the
target
system.
2
From the
Replication
page, click the
Target Role
link.
The
Target Role
page displays (see
figure 79
).
Figure 79 Target Role Page
Target
Host names or
IP addresses
3
Enter the source system hostname or IP addresses for the replication
source system and click
Apply
. Up to ten sources can be defined.
Note:
For more information on accessing the remote
management pages, see
chapter 3, DXi3500 and DXi5500
Remote Management
.