![background image](http://html2.mh-extra.com/html/quantum/dxi3500/dxi3500_user-manual_3721417098.webp)
Chapter 3 DXi3500 and DXi5500 Remote Management
Configuration
Quantum DXi3500 and DXi5500 User’s Guide
78
Table 17 Port Settings
Configuring the RAID Settings
3
The DXi3500/DXi5500 system allows you to configure new hard drives
that have been added to the system.
To access the RAID Configuration page:
In the
Hardware
page, click
RAID
.
The
RAID Configuration
page displays (see
figure 43
).
Field
Description
Node World
Wide Name
(WWN)
The node WWN is the overall system
identification on the customer SAN. This field
allows you to set the WWN in case a controller
is replaced so the customer SAN will not
require remapping.
AL_PA and
Loop ID
This field allows you to set either a soft or hard
AL_PA. Soft allows the customer SAN to
automatically assign a loop ID to the DXi3500/
DXi5500 System. Hard allows you to manually
assign the loop ID. The Default setting is soft.
Speed
This field allows you to select the maximum
link speed of the Fibre Channel port (1GB/sec,
2GB/sec, or Automatic). The default setting is
Automatic.