![background image](http://html2.mh-extra.com/html/quantum/dxi3500/dxi3500_user-manual_3721417092.webp)
Chapter 3 DXi3500 and DXi5500 Remote Management
Configuration
Quantum DXi3500 and DXi5500 User’s Guide
72
Figure 39 Device Mapping
Page
2
There are four ways to assign virtual devices to a specific iSCSI or
Fibre Channel port:
• Click
Auto Populate (Partition Per Port)
to allow the DXi3500/
DXi5500 controller to automatically assign virtual devices to a
port. The controller assigns a robot and partition to each port.
Example: A system with 1 partition would have a robot assigned
to LUN 0 and all other devices within that partition assigned to
additional LUNs on that port.
• Click
Auto Populate (iSCSI only)
to allow the DXi3500/DXi5500
controller to automatically assign virtual devices to ONLY the
iSCSI ports. The controller assigns a robot and partition to each
iSCSI port.
Example: A DXi3500/DXi5500 has two potential iSCSI ports. A
system with 2 partitions would have a robot assigned to LUN 0
on Eth 1 and Eth 2 and all other devices within that partition
assigned to additional LUNs on that port.