Chapter 3 DXi3500 and DXi5500 Remote Management
Configuration
Quantum DXi3500 and DXi5500 User’s Guide
62
4
Enter the alpha characters (0 to 6 characters) in the
New Alpha Prefix
field.
5
Enter the numeric character in the
Numeric Ending
field.
6
When you have selected the tape(s) and both the alpha and numeric
characters, click
Apply
.
Barcode labels are assigned for the selected tape(s).
7
Return the DXi3500/DXi5500 system to the on-line state (see
“VTL/
NAS Actions”
on page 121).
Configuring VTL Properties
3
The VTL name identifies the DXi3500/DXi5500 system so it can be
distinguished from other devices on the network through the SNMP
interface.
To set the VTL name:
1
Set the DXi3500/DXi5500 system to the off-line state (see
“VTL/NAS
Actions”
on page 121).
2
From the
VTL
link of the
Configuration
page, click the
Properties
link.
The
Properties
page displays (see
figure 33
).
Note:
If you are entering alpha characters for the first part of a
barcode number and this is the first number in a range, no
more than five characters can be used. This allows the
system to assign the last character in the field.
Note:
This number is used as the first number in the range of
tape cartridges. The number will increment with each
additional cartridge in the field.