![background image](http://html2.mh-extra.com/html/quantum/dxi3500/dxi3500_user-manual_3721417085.webp)
Chapter 3 DXi3500 and DXi5500 Remote Management
Configuration
Quantum DXi3500 and DXi5500 User’s Guide
65
Table 16 Network
Configuration Fields
3
In the
General
section, select the port you wish to associate to the
default gateway.
4
Edit the default gateway, host, and domain information as desired.
5
Click
Apply
.
Caution:
If NAS shares exist on this system and you change the
network information, the system will reboot. Ensure
that there are no backups running before changing the
network information.
Field
Description
DHCP
Enable or disable DHCP on the specific DXi3500/DXi5500 port (port 1 or port 2).
IP Address
View or set the IP address for the DXi3500/DXi5500 system.
Network Mask
View or set the network mask for the DXi3500/DXi5500 system
Link Speed &
Duplex
View and set the link speed and duplex for the DXi3500/DXi5500 system (10/100/
half/full/auto)
Port Gateway
The
Port Gateway
is a static route that can configured for this interface.
It is optional
. If you want to configure a route, you must specify all
three fields (
Network
,
Netmask
, and
Gateway
).
Network
View and set the
Network Addres
s of this route. Normally, it is the
subnet of the static IP address.
Netmask
View and set the
Network Mask
for this route.
Gateway
View and set the
Gateway
IP address for this route.
Note:
If the system has DHCP enabled and cannot receive an IP
address from the DHCP server, the system will reset back
to the default IP address (10.1.1.1 for port 1 and 10.0.1.0 for
port 2). If the port is DHCP enabled, the DHCP server
provides the default gateway, domain name, and DNS IP
address, even though the user has entered values for these
fields.