![background image](http://html2.mh-extra.com/html/quantum/dxi3500/dxi3500_user-manual_3721417137.webp)
Chapter 3 DXi3500 and DXi5500 Remote Management
Data Replication
Quantum DXi3500 and DXi5500 User’s Guide
117
The system prompts you for a hostname or IP address of the
source system.
b
Enter the hostname or IP address for the source system where
you want the replicated partition to failback.
The VTL partition is failed back to the source system. On the
source system, select the recovered VTL partition from the
replicated VTL partition list and click
Recover
. The VTL partition
and its cartridges are recreated on the source system. You must
add tape drives and a robot as well as map the devices before the
VTL partition is accessible (see
Configuring Partitions
on
page 53).
Target Role NAS
3
The
Target Role NAS
section is used to select and perform actions on
replicated NAS shares such as
Recover
,
Failback
, or
Delete
replicated
NAS shares.
1
Click
NAS
from the
Target Role
page to replicate NAS shares.
The
Target Role NAS
page displays (see
figure 67
).
Note:
Currently, the DXi3500/DXi5500 only supports NFS 2 and
NFS 3 protocols. NFS 4 is NOT supported.