![background image](http://html2.mh-extra.com/html/quantum/dxi3500/dxi3500_user-manual_3721417069.webp)
Chapter 3 DXi3500 and DXi5500 Remote Management
Configuration
Quantum DXi3500 and DXi5500 User’s Guide
49
6
If the username is not a member of the Administrator or Domain
Admins group, then check to make sure he has the correct rights to
join a domain:
# net ads status -U
Make sure you see the following lines in the output:
dNSHostName: dx1.abc.def.xyz.com
servicePrincipalName: HOST/ dx1.abc.def.xyz.com
servicePrincipalName: HOST/DX1
If these lines are absent, user1 does not have the required rights to
join the domain. In this case, follow the instructions in Section C
(both items 1.a and 1.b) to delegate enough rights to user1 so that he
can join the domain.
7
Finally, the errors from joining ADS domain are logged in:
/tmp/nas/cifs.ads.join
The contents are overwritten each time you join the domain either
from the GUI or by running an appropriate CLI command. The CLI
command is not officially supported. You can run
# nastool
without options to show the syntax. Note that certain subcommands
require a password. If you do not type the password option, you will be
prompted interactively and the password entered will not be echoed on
screen.
Access Control
3
The
Access Control
section is used to add or edit workgroup users.
To access the
Access Control
page:
1
From the
NAS
page, click the
Access Control
link.
The
Access Control
page displays (see
figure 25
).
Note:
For an ADS CIFS configuration there is no need to configure
workgroup users.
Note:
To
Edit
a workgroup user, click the
Username
link.