40
Status LED
Operation
LED
Function / Meaning
green
*
Device in operation mode, continuous measurement active
flashing green
*
Device in operation mode, trigger active, waiting for pulse signal
red
*
Internal temperature too high or too low
flashing red
*
Incorrect measurement
blue
*
Measuring interval too short
flashing blue
*
Distance beyond measurement range
flashing
blue/red
Hardware failure
*
green
no output has been activated
*
red
At least one output has been activated
dark
flashing red
Short circuit on one of the digital outputs
dark
dark
Supply voltage missing
*have no meaning, but are not off
17.2 Status LED
– Fault Messages
18 Software
18.1 Settings
Connect the equipment with the software
Establish a connection with a Windows PC via the RS 485 Interface so that the LMA/B can be
detected by the software. The easiest way to do this is by means of the Interface Converter SIC 485U
(see 6.2).
Install the parameterization software ProSoft P1 by running the file SetupProSoftP1.exe. Program can
then be started through the icon ProSoft P1 on your Desktop.
After software has started select your language:
Deutsch
or
English
Status LED
Error
Remedy
Blue
Object beyond measurement range
Change setting for measurement range
(see
above)
red
Internal temperature too high
Increase distance from heat source or provide
sensor cooling / alternatively reduce LED power.
flashing red
Incorrect measurement, due to too
poor, too strong or disturbed signal
Choose a measurement target with higher or
lower reflectivity. Eliminate causes of disturbance,
such as vapour, dirt, etc.
blue
Measuring interval is too short
Measuring interval is too short to determine
distance.
Increase
measurement
range
in
software settings
flashing
red/blue
Hardware error
Error is associated with hardware failure. Unplug
briefly the equipment from the mains and restart
operation. Should the error show again, ask the
manufacturer.
