ProMinent Chlorinsitu-III, Assembly And Operating Instructions Manual, Page: 73 / 120

11.3.2 Cleaning the Suction Unit in the Brine Storage Tank
A1968
1. 2.
3.
4.
5.
6.
Fig. 47: Cleaning the suction unit in the brine storage tank
1.
Unscrew the coupling on both hoses (1) on the suction unit.
2. Remove the suction unit (2) out of its housing.
3. Unscrew the filter meshes (3) from the housing.
4. Flush the filter meshes (4) with softened water.
Replace the filter meshes during three-yearly maintenance.
5. Screw the clean / new filter meshes into the housing.
6. Remove the non-return valve (5).
7. Flush the non-return valve (5) with softened water.
8.
Make sure that the arrow on the non-return
valve points upwards.
Remove the non-return valve (5)
9.
Make sure that the arrow on the non-return
valve points upwards.
Make sure that there are O-rings in the cou‐
pling and that they are undamaged.
Insert the suction units into the housing.
10. Screw the coupling on both hoses onto the suction unit.
Performing maintenance on both suc‐
tion lines:
Preventative maintenance
73