Operation and installation manual
Page 47 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
Message Error
Warning
Error
Type
Description
//
E034
Interlock Fail (Not Used)
//
E035
Remote
Off
Remote switch-off
//
E036
Vout
Avg
Average output voltage out of range
W012
//
Clock Battery Low (No disconnection)
Clock battery low (not working)
W013
//
Clock
Failure
(No
disconnection)
Faulty clock (not working)
5.5
LCD
5.5.1
System connection to the grid
The two-line Liquid Crystal Display is located on the front panel and shows:
9
Inverter operating status and statistics;
9
Service messages for operator;
9
Alarm messages and fault indications.
During regular operation, the display will cycle through available data. Screen pages
change every 5 seconds, or you can manually scroll through them by pressing UP (2
nd
key on display) and DOWN (3
rd
key on display).
1) When the inverter is started, the two pages below are displayed:
2) While waiting for the connection, the following pages could be displayed:
-
When system is checking grid connection “Missing Grid”, the yellow LED next to
the display is steady on and the green LED is flashing.
-
When waiting for the sun, “Waiting Sun”, the green LED is steady on.
-
When the conditions “Missing Grid” and “Waiting Sun” are met the inverter
connection occurs.
POWER-ONE
Initialing…
Please wait
Missing Grid
Waiting Sun
