Operation and installation manual
Page 19 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
3
INSTALLATION
WARNING
: The electrical installation of AURORA must be performed in
compliance with applicable local and national standards and laws.
WARNING
: The connection of AURORA to the electrical distribution grid
must be performed only after receiving authorization from the utility that
operates the grid.
3.1
Package Inspection
NOTE:
The distributor delivered your AURORA to the carrier safely
packaged and in perfect condition. Upon acceptance of the package, the
carrier assumes responsibility for its safe delivery. In spite of careful
handling, transport damage to package or its content is always a possibility.
The customer is encouraged to perform the following checks:
¾
Inspect the shipping box for apparent damage, such as holes, cracking or any sign
of possible damage to its contents.
¾
Describe any damage or shortage on the receiving documents and have the
carrier sign his/her full name.
¾
Open the shipping box and inspect the contents for internal damage. While
unpacking, be careful not to discard any equipment, parts or manuals. If any
damage is detected, call the delivering carrier to determine the appropriate action.
Save all shipping material for the event the carrier sends an inspector to verify
damage!
¾
If the inspection reveals damage to the inverter call your local supplier or the
authorized distributor. They will determine if the equipment should be returned
for repair. They will also provide instructions on how to get the equipment
repaired;
¾
It is the customer's responsibility to file a claim with the carrier. Failure to file a
claim with the carrier may void all warranty service rights for any damage;
¾
Carefully store away AURORA original packaging since it shall be used in case
it is necessary to ship it for repair.
