Operation and installation manual
Page 21 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
3.3
Selecting the place of installation
Place of installation should be selected based on the following considerations:
¾
AURORA shall be set at a suitable height from the ground to enable easy readout
view of the display and the state LEDs.
¾
Select a well ventilated place sheltered from direct sun radiation. Choose a place
that allows unobstructed air flow around the unit.
¾
Allow sufficient room around the unit to enable easy installation and removal of
the object from its mounting surface.
¾
Hardware and software maintenance is mostly done from the front panel. It is then
necessary to easily gain access to this side, or you will have to remove the unit
from its mounting surface.
The following figure shows the recommended minimum clearances around the
inverter:
Fig.5 - Place of installation - Minimum clearances around AURORA
200mm (8”)
150mm (6”)
