Operation and installation manual
Page 33 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
3.7
Procedure for gaining access to internal terminal boards by removing the
front panel
WARNING
: Shock hazard! Before removing the panel, disconnect
AURORA at both the AC and DC side and allow at least 5 minutes for the
internal capacitors to discharge.
Loosen the 6 screws shown in figure 16 using the supplied torx screwdriver and
remove the front panel.
Fig.16 - AURORA with front panel
After putting back the panel, tighten the screws to at least 1.5Nm (13.2 in-lbs) to
ensure sealing.
1
3
2
4
5
6
