Operation and installation manual
Page 61 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
An arrow on the left side of the display highlights your current selection. After
selection, press ENTER to confirm activation of chosen mode.
PRODUCTION
: Activates the relay only when inverter is connected to the grid
(closing of contact across “N.O.” and “C” terminals)
FAULT
: triggers relay activation (closing of contact across “N.O.” and “C” terminals)
only when an error signal is present, i.e. in case of grid disconnection, except for Input
Under Voltage.
Fig. 24 - alarm contacts terminal board
5.5.7.10
Remote control
Use this function to disable inverter manual switch-off. Selecting:
- ENABLE, ON/OFF manual function is active
- DISABLE, ON/OFF manual function is disabled, so that Aurora operation will be
only controlled by the external radiation conditions.
Manual ON and OFF input is read on the inverter digital input. When in OFF
condition, the display will cycle through the following pages:
Remote ON/OFF
Disable
Remote ON/OFF
Enable
Remote Off
Waiting Rem.ON…
….to restart
