Operation and installation manual
Page 34 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
3.8
Changing the lithium battery of the type CR2032
Aurora contains a lithium battery of the type CR2032. When battery is nearly flat a
message is displayed on LCD to warn about battery state.
Remove Aurora front panel (see fig.16) and this battery is in view.
The battery can not be inserted straight onto its mount, you need to fit it from the side
(side A), tilted by about 30°. The component will settle into battery mount until
finding its correct position.
Fig.17 - AURORA battery
WARNING
: This component should only be replaced by qualified
personnel.
3.9
Changing the memory
All log data about system production are stored in this memory. Should it be necessary
to change the inverter, it is possible to simply remove the memory from the old unit
and installed into the new one. In this way you lose no data and can save the present
and future daily information See fig.18
Fig. 18 - Inverter memory
Side A
Slide in tilted by
about 30°
