Operation and installation manual
Page 37 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
5
MONITORING AND DATA TRANSMISSION
5.1
User interface mode
AURORA inverter generally does not require any inspection since it works in
automatic mode. When solar radiation is not sufficient to output power to the grid (for
example at night) AURORA automatically disconnects, and sets to standby mode.
The operating cycle is automatically resumed when solar radiation is sufficient. In this
case the LEDs will indicate this state.
AURORA inverter can give information about its operation by means of:
¾
LEDs
¾
LCD displaying operating data
¾
Data transmission via dedicated RS-485 serial line. Data can be collected by a PC
or data logger provided with an RS-485 port. When using the RS-485 line, it
could be useful to use the serial interface converter AURORA RS-485/RS232
model number PVI-RS232485. It is equally possible to use an optional data
logger AURORA Easy Control.
