Operation and installation manual
Page 5 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
ASSEMBLY
Devices shall be assembled and cooled according to the specifications mentioned in
the relevant literature.
In particular, during transport and handling, parts shall not be bent and/or the
insulation distances shall not be changed. Devices shall not get in contact with any
electronic components or connection terminals.
Electrical parts must not be mechanically damaged or broken (potential health risk).
ELECTRICAL CONNECTION
When working with the inverter energized, comply with all prevailing national
regulations on accidents prevention.
Electrical connections shall be carried out in accordance with the applicable
regulations, such as conductor sections, fuses, PE connection.
OPERATION
Systems with inverters shall be provided with further control and protective devices in
compliance with the corresponding prevailing safety rules, such as those relating to the
compliance with technical equipment, accident-preventing regulations, etc. Any
calibration change shall be made using the operational software. After disconnecting
the inverter from distribution grid, wait for capacitors to discharge before
servicing/touching any live part and electric connection. Comply with all
corresponding marks and symbols present on each device. During operation, make
sure that all covers and doors are closed.
MAINTENANCE AND SERVICING
Comply with manufacturer's instructions.
SAVE ALL DOCUMENTS IN A SAFE PLACE !
