Operation and installation manual
Page 51 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
Ppk Day: indicates peak power maximum value reached during the day. Count is reset
when unit is switched off.
7A)
Vout R: measured instant value for the phase R voltage
Vout Avg R: phase R voltage average value calculated in the last 10 minutes of
inverter operation
The same page is then available for phase S and phase T.
8A)
Iout R: measured instant value for the phase R current
Fout: measured instant value for the phase R frequency
The same page is then available for phase S and phase T.
9A)
Vin 1: instant value for the input voltage, measured at input 1
Iin 1: instant value for the input current, measured at input 1
10A)
Vin 2: instant value for the input voltage, measured at input 1
Iin 2: instant value for the input current, measured at input 1
When channels are connected in parallel, the previous two pages are summarised in
one single page indicating the reading of Vin and Iin values.
Vin 2 0 V
I in 2 0.0 A
Vin 1 0 V
I in 1 0.0 A
Iout R 0.8 A
Fout 50.18 Hz
Vout R 197 V
Vout Avg R 0 V
