Operation and installation manual
Page 58 of 82
(PVI-10.0/12.5-OUTD-xx Rev:1.2)
Use this function to set addresses for the communication of each single inverter
connected to the system onto RS485 line. Available address numbers are from 2 to 63.
Press UP or DOWN to scroll available numbers.
If you do not want to manually set the address for each and every inverter, you can
select the AUTO function that will automatically set them and match them to the
inverters.
5.5.7.2
Display set
Use this function to set display features:
1)
Light
: display light setting:
- Press MODE to set display backlighting.
After selecting Mode with the arrow, press ENTER to open the corresponding sub-
menu. The page is like this:
ON: Light always on
OFF: Light always off
AUTO: Automatic light control. Light turns on any time you press any key and stays
on for 30 sec, then gradually turns off.
2)
Contrast
: display light contrast
Display lighting scale is from 0 to 9.
ON
OFF
Auto
Mode
Intensity
Light
Contrast
Buzzer
New Address
Auto
New Address
63
AUTO
2
3
…..
…..
62
63
AUTO
