Power Computing PowerBase Low-Profile User Manual Download Page 96

Page: 96 / 240

Installing PCI Expansion Cards

PowerCenter Pro User’s Guide

For Technical Support, Call 1-800-708-6227

Installing expansion cards

Follow the procedure below to install expansion cards.

How to install a PCI card

1. Remove the computer’s cover.

See

Removing the cover,

starting on page 60 for instructions.

WARNING!

Make sure the computer is powered down before removing the cover.

CAUTION:

Touch the metal plate over the hard disk drive to discharge any

static electricity that might have built up on your clothes or body.

The system must be plugged in (see step 1 on page 61) for this to work

CAUTION:

Use an anti-static grounding strap and handle cards by the non-

metallic edges only.

2. Select an unoccupied slot on the riser card.

5 Install card Page 66 Friday, June 6, 1997 9:51 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Brands by name

Popular brands

Power Computing PowerBase Low-Profile, User Manual

Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Brands by name

Popular brands