manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 101

 

For Technical Support, Call 1-800-708-6227

 

PowerCenter Pro User’s Guide  

 

71

 

6

 

Adding Memory

 

6

 

This chapter explains how to enhance the capabilities of your computer by 
adding additional memory.

 

Note:

 

There are two chassis types, Minitower, and Low-Profile. Where the 

differences in the chassis types are significant both chassis types will be 
illustrated; where there is no significant difference, a single type will be 
shown.

 

Adding memory

 

Your computer’s random-access memory (RAM) can be increased. Memory is 
increased by installing or replacing memory modules. The computer uses 
DIMMs, or dual in-line memory modules for RAM. Make sure that the memory 
modules you purchase are compatible with your computer. See Appendix B, 

 

Technical Information,

 

 on page 107 for technical specifications.

 

Required tools

 

■

 

A small regular (slot-head) screwdriver or a small coin

 

■

 

A small Phillips-head screwdriver

 

Removing the cover

 

Installing RAM requires that you remove the computer’s cover. The cover is 
designed for easy removal.

 

CAUTION:

 

If you are not proficient with electronic equipment, Power 

Computing Corporation recommends that you have a certified technician 
install RAM. If you attempt to install RAM yourself, any damage you may 
cause to your equipment will not be covered by the limited warranty on 
your computer. Please call technical support at 1-800-708-6227 for 
additional information about this or any other warranty question.

 

Chapter

 

6 Add mem  Page 71  Friday, June 6, 1997  9:53 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands