manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 94

 

Installing PCI Expansion Cards

64

 

PowerCenter Pro User’s Guide

 

For Technical Support, Call 1-800-708-6227

 

If you have a Low-Profile chassis

 

1. Remove the three large thumb screws from the rear of the computer 

cover and put them where you will be able to find them when you’re 
ready to replace the cover.

 

One thumb screw is at the top of the cover to the left of center; the other 
two are on the sides. If necessary, use a small coin or a flat-bladed 
screwdriver to loosen the screws.

 

2. Gently, but firmly, pull apart the bottom corners of the cover, pull 

the cover toward you slightly, lift it off and set it aside.

thumb screws

 

5 Install card  Page 64  Friday, June 6, 1997  9:51 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands