manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 3

 

For Technical Support, Call 1-800-708-6227

 

PowerCenter Pro User’s Guide  

 

iii

 

Support Information

 

For basic customer and technical support information, as well as product 
information and other news, visit our Web Site at:

 

http://www.powercc.com

 

Customers who purchased systems directly from Power Computing should use 
the numbers listed below to contact Power Computing for assistance (all times 
are United States Central Time).

Customers who did not purchase systems directly from Power Computing 
must contact the dealer they purchased their system from for assistance.

 

Sales

 

To place or check 
on an order you 
haven’t received yet

M – F   8 AM to 10 PM
Sat       9 AM to 6 PM
Sun    10 AM to 6 PM 

1-800-999-7279

 

Customer 
Support

 

If you have a ques-
tion about an order 
you have received 

M – F   8 AM to 6 PM
Sat      10 AM to 4 PM
Sun    10 AM to 6 PM 

1-800-671-6227

 

Technical
Support

 

For help with a 
technical question

M – F   8 AM to 8 PM
Sat     10 AM to 4 PM 
Sun    10 AM to 4 PM

1-800-708-6227

 

 0Front  Page iii  Friday, June 6, 1997  9:21 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands