manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 176

 

146

Hard Disk ToolKit•

 

Personal Edition

 

 Reference Guide

 

To format a device:

 

Back up all valuable data before proceeding! Formatting will write over the contents of the 
entire disk.

 

1.

 

In the Selector window, select the device to be formatted.

 

2.

 

From the Devices menu, choose 

 

Format

 

. The Format Device dialog

box appears (Figure 7.8).

Hard Disk ToolKit•PE’s Format command will overwrite all previously existing data on the 
device. Be sure that you have backed up any valuable data on the drive before performing a 
Format.

3.  Make your desired changes to the settings:

• Format Type:

Select the type of format to perform on the selected device: 
Quick or Low Level. The Quick format is the default selection 
and is the appropriate choice for most formatting purposes. For 
more information, see Formatting: Quick vs. Low Level on 
page 144.

• Verify After Formatting:

Enable this checkbox to verify that all blocks on the disk are 

Figure 7.8:

The Format Device dialog box.

!

!

2B. HDT 2.0 Primer Usage  Page 146  Friday, June 6, 1997  3:06 PM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands