manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 22

 

xxii

 

PowerCenter Pro User’s Guide

 

For Technical Support, Call 1-800-708-6227

 

Contacting Technical Support

 

To contact Power Technical Support call (800) 708-6227, fax (512) 388-6738, 
or e-mail 

 

[email protected]

 

 and describe in detail the problem that you 

are having with your Hardware.

For details on contacting Technical Support, see 

 

Technical Support Contact 

Information 

 

on page 56.

Be sure to include your model number, serial number, date of purchase and 
phone number with all correspondence. We advise you to confirm receipt of 
all fax or e-mail requests.

Technical Support telephone hours are as follows (all times are United States 
Central Time).

 

Technical
Support

 

For help with a tech-
nical problem

M – F   8 AM to 9 PM
Sat     10 AM to 4 PM
Sun    10 AM to 4 PM

1-800-708-6227

 

 3MacOS License  Page xxii  Friday, June 6, 1997  9:31 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands