Power Computing PowerBase Low-Profile User Manual Download Page 109

Page: 109 / 240

Adding Memory

For Technical Support, Call 1-800-708-6227

PowerCenter Pro User’s Guide

Prepare the computer

If you haven’t done so, remove the cover from the computer.

See

Required tools,

starting on page 71 for instructions.

WARNING!

Make sure the computer is powered down before removing the cover.

CAUTION:

Touch the metal plate over the hard disk drive to discharge any

static electricity that might have built up on your clothes or body.

The system must be plugged in (see step 1 on page 72) for this to work.

CAUTION:

Use an anti-static grounding strap and handle memory

modules by the non-metallic edges only.

6 Add mem Page 79 Friday, June 6, 1997 9:53 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Brands by name

Popular brands

Power Computing PowerBase Low-Profile, User Manual

Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Brands by name

Popular brands