Power Computing PowerBase Low-Profile, User Manual, Page: 166 / 240

136 Hard Disk ToolKit•
Personal Edition
Reference Guide
window). The address of the device is listed in the Partition List window’s
title bar.
Every storage device must have a Partition Map, driver partitions, and at
least one Mac OS partition created for general storage before any vol-
ume(s) can be mounted to the Desktop. Partitions are sorted according to
their physical location on the disk. Every block on the disk must exist in
some type of partition, whether it is
Apple_HFS
,
Apple_Free
,
Apple_partition_map, or some other type. HDT• PE automatically creates
all partition types for you.
For more information, see Partitioning in the online manual. For more information on
driver partitions, see All About Drivers in the online manual.
You may see the Apple_Free partition type—this is unallocated free space.
The free space partition on the disk cannot be mounted to the Desktop.
Mountable partitions (also known as volumes) are created from free space.
To transform unallocated free space into a mountable volume, see
Creat-
ing New Volumes in the online manual.
On a drive with greater than 1GB capacity, the driver partition must reside within the first
1GB of disk space, or Macintoshes older than the Quadra 840
AV
cannot start up off the disk.
HDT• PE will create a driver partition only within the first 1GB of disk space.
Figure 7.4:
The Partition List window. Notice that the bus and ID
information for the device is displayed in the title bar.
NOTE
NOTE
2A. HDT2 Primer Intro Page 136 Friday, June 6, 1997 2:50 PM