manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 91

 

Installing PCI Expansion Cards

 

For Technical Support, Call 1-800-708-6227

 

PowerCenter Pro User’s Guide  

 

61

 

CAUTION:

 

Never turn the computer on or operate the computer with the 

cover removed.

 

How to remove the cover

 

1. Shut down the computer and turn off the monitor, but leave the 

computer plugged in to the electrical outlet.

 

Leaving the computer plugged in ensures that it is grounded.

 

2. If the monitor is on top of the computer, disconnect it if necessary, 

and set it aside.

 

Otherwise it’s going to be awkward to remove the computer cover.

 

3. Disconnect everything but the power cord from the back of the 

computer.

4. Rotate the computer so that its back panel faces you.

5. Remove the screws and cover as follows:

 

If you have a Minitower chassis

 

1. Remove the four large thumb screws from the rear of the computer 

cover.

 

5 Install card  Page 61  Friday, June 6, 1997  9:51 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands