Power Computing PowerBase Low-Profile User Manual Download Page 158

Page: 158 / 240

128

Hard Disk ToolKit•

Personal Edition

Reference Guide

The Hard Disk ToolKit•

folder on the CD-ROM contains the files in

the following table:

You can view or print the

Read Me First

and

Supported Devices

files by

opening the files with SimpleText (included with the Mac OS) or other
word processing application.

Installing Hard Disk ToolKit•

Determine where you will install Hard Disk ToolKit•

Personal Edition

. If

you do not select a location for Hard Disk ToolKit•

, it is installed by

default onto your startup disk.

A Read Me file is installed onto your hard disk by the Hard Disk ToolKit•

Installer. Be

sure to read it for important information regarding compatibility issues that became
available after this manual was printed.

Module Name

Location

Purpose

Hard Disk ToolKit•

folder

This is the main application of the HDT•

software package. It

formats, initializes, and partitions SCSI & IDE disk devices.

FWB Mounter

Hard Disk ToolKit•

folder

This application scans SCSI & IDE buses and mounts /unmounts devices
and/or volumes without the need to launch Hard Disk
ToolKit•Personal Edition.

Device Data file

Hard Disk ToolKit•

folder

This resource is used by HDT to optimize the settings for nearly every
hard drive manufactured for the Macintosh.

Read Me First file

Hard Disk ToolKit•

folder

Contains important information that became available after the
manual was printed.

Supported Devices file

Hard Disk ToolKit•

folder

This file contains a list of devices supported by HDT•

QuickHelp application

Hard Disk ToolKit•

folder

This application is the “help engine” of the HDT•

application. It is

launched automatically when HDT•

’s online help is used.

Hard Disk ToolKit•

Help file

Hard Disk ToolKit•

folder

This file contains all of HDT•

’s online help information. It is opened

automatically when HDT•

’s online help is used.

Hard Disk ToolKit•

Installer

Hard Disk ToolKit•

folder

This installs Hard Disk ToolKit•

to your hard drive.

1B. HDT 2.0 Installer OEM Page 128 Friday, June 6, 1997 2:46 PM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Search results

Summary of Contents for PowerBase Low-Profile

Reviews:

Power Computing PowerBase Low-Profile, User Manual, Page: 158 / 240

Search results

Summary of Contents for PowerBase Low-Profile

Reviews: