manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 202

 

172

CD-ROM ToolKit Reference Guide

 

Drive Setup features are discussed in detail in the online 

 

CD-ROM Toolkit User Guide

 

. 

 

Cache

 

Select 

 

Cache

 

 to set up caching for a selected CD-ROM drive. Cache settings

control the amount of RAM and disk space you want to devote to caching
data from your CDs to accelerate their performance. The values you set here
apply to the options you select in both the Prescan and Read Ahead setup fea-
tures.

 

4

All Setup features have 

 

Default

 

, 

 

Cancel

 

 and 

 

OK

 

 button options.

• Click 

 

Default

 

 to return feature options in the current screen to their original CDT settings.

• Click 

 

Cancel

 

 to leave Setup Features, leaving all options unchanged.

• Click 

 

OK

 

 to save your changes to the feature options.

 

Figure 2.

 

Cache options

 

Setup feature

NOTE

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands