manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 33

 

Getting Started

 

For Technical Support, Call 1-800-708-6227

 

PowerCenter Pro User’s Guide  

 

3

 

2. Set the 115/230 volt switch to the correct setting for your country.

 

Set the switch to 115 volts for the U.S., Canada, and Japan. Use the 230-
volt setting in most European countries.

 

3. Connect the socket end of the power cord to the power input socket 

on the back of the computer.

4. Connect the plug end of the power cord into a grounded, three-hole 

electrical outlet. If you have any expansion cards, follow the 
instructions in Chapter 5, 

 

Installing PCI Expansion Cards, 

 

on page 59 

to install them now.

 

Connecting the monitor

 

Your computer can be used with a wide variety of monitors.

The basic system comes with built-in video circuitry and 2 MB of Video RAM. 
A 4 MB VRAM video card is also available as an upgrade option from Power 
Computing. 

 

Video memory configurations 

 

on page 110 lists the various monitor 

sizes, resolutions, and number of colors supported for both the 2 MB and 4 MB 
video cards.

 

1 Get Start  Page 3  Friday, June 6, 1997  9:36 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands