manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual, Page: 211 / 240

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 211

182

CD-ROM ToolKit Reference Guide

You have four views to choose from:

1. CDT Remote standard view.

2. CDT Remote at the first level of Show Fewer Controls.

3. CDT Remote at the second level of Show Fewer Controls.

4. CDT Remote at the first level of Show More Controls, which appears

on the Player menu after you have exhausted Show Fewer Controls.
Use this remote view for CD+G CDs, also known as CD Karaoke.

Chapter 7 of the online CD-ROM Toolkit User Guide, Technical Information, contains 
information on CD+G vendors and titles.

Playing Audio Discs with CDT Remote

Three types of CDs contain music:

• traditional audio CDs
• multimedia audio CDs
• Enhanced CDs, such as CD Extra™ and ActiveAudio-type CDs

Figure 6.

The four views of CDT Remote

1

2

3

4

NOTE

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments