manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 32

 

Getting Started

2

 

PowerCenter Pro User’s Guide

 

For Technical Support, Call 1-800-708-6227

 

Plugging in the computer

 

Set up and plug in the computer before connecting the monitor, keyboard, 
and other devices. Plugging in the computer ensures that it is grounded and 
protected from electrical damage. The key components for plugging in the 
computer are shown below.

 

WARNING!

 

For your safety, the computer is equipped with a three-prong 
plug designed to be used with a grounded electrical outlet. If 
you do not have access to an appropriate outlet, have an 
electrician install one. Do not use your computer with a three-
prong adapter in an ungrounded outlet.

 

To plug in the computer:

 

CAUTION:

 

Do not press the power switch on the front panel of the 

computer or the keyboard power switch until you have completed all of 
the setup instructions.

 

1. Place the computer in the location you have chosen.

115/230 volt 
switch

power input 
socket

 

1 Get Start  Page 2  Friday, June 6, 1997  9:36 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands