manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 145

 

For Technical Support, Call 1-800-708-6227

 

PowerCenter Pro User’s Guide  

 

115

 

C

 

Regulatory 
Information

 

C

 

This appendix contains information required by regulatory agencies.

 

FCC Declaration of Conformity

 

This device complies with the CFR Title 47, Part 15, of the FCC Rules and 
complies with Class B Limits for Digital Devices. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

 

Radio and television interference

 

The equipment described in this manual generates, uses, and can radiate radio-
frequency energy. If it is not installed and used properly — that is, in 
accordance with the manufacturer’s instructions — it may cause interference 
with radio and television reception.

This equipment has been tested and found to comply with the limits for a Class 
B digital device in accordance with the specifications in Part 15 of FCC rules. 
These specifications are designed to provide reasonable protection against such 
interference in a residential installation. However, there is no guarantee that 
interference will not occur in a particular installation.

You can determine whether your computer system is causing interference by 
turning it off. If the interference stops, it was probably caused by the computer 
or one of the peripheral devices.

If your computer system does cause interference to radio or television 
reception, try to correct the interference by using one or more of the following 
measures:

 

Appendix

 

C Reg Info  Page 115  Friday, June 6, 1997  10:18 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands