manualshive.com logo in svg

Power Computing PowerBase Low-Profile, User Manual

Share
Download
Power Computing PowerBase Low-Profile User Manual Download Page 110

 

Adding Memory

80

 

PowerCenter Pro User’s Guide

 

For Technical Support, Call 1-800-708-6227

 

Removing a DIMM

 

1. If you need to remove a DIMM module to make room for a higher-

capacity one, reach in and push down on the tiny lever at the end of 
the DIMM slot.

2. The DIMM should pop loose from the slot at the lever end.

3. If the DIMM module does not come free, press the DIMM lever down 

again.

4. Grasp the DIMM module with one hand at each end and rock the 

module up and out of the slot by pulling first on one end and then 
the other.

5. When you are finished with DIMM removal and insertion, replace 

the cover and reconnect external cables to your computer.

CAUTION:

 

Be careful not to get any cables caught in the cover or the fan 

housing when you put it back on the computer.

A. push 
    lever 
    down 

B. rock DIMM out

lever

 

6 Add mem  Page 80  Friday, June 6, 1997  9:53 AM

Summary of Contents for PowerBase Low-Profile

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands